The quality of a bulk cosmetic also depends on how it is transported and stored after manufacture. A formula that is compliant when it leaves the factory can be exposed to risks if it is subjected to unsuitable temperatures, if its container is damaged or if its traceability is lost. The buyer must therefore set out receiving and storage conditions in its specifications.

Which risks should be taken into account during transport?

Temperature variations, vibrations, exposure to light and impacts can affect certain formulations or their containers. The risks are not the same for a vegetable oil, an emulsion or a gel. Logistics instructions must therefore be based on the characteristics of the product and the available data, rather than on a single rule announced for all cosmetics.

The wedging of packages, the closure and the legibility of batch numbers are as important as the vehicle used.

How to organise a professional storage area?

Identify the products, keep the containers in the conditions communicated by the supplier and avoid unnecessary handling. It is recommended to separate batches awaiting inspection from accepted batches and from non-compliant products. Procedures must make it possible to quickly trace the origin of a can and the quantity still available.

Set rules for opening, sampling and closing when the container is used gradually.

Which checks should be carried out on receipt?

Compare the delivery with the order and the associated documents. Check the integrity of the container, the batch identity, the quantities and any visible anomalies. In the event of a leak or a significant discrepancy, isolate the unit concerned and inform the supplier before any use. Analytical testing on receipt must be defined according to the risks and the contract.

Simple records avoid relying solely on the memory of operators.

Illustration of two people in work clothes near cans and cartons

How to organise this with BIOCYLAB?

Specify the country of shipment, the climate and the planned mode of transport, the volumes, the planned storage periods and the use of the bulk product. BIOCYLAB will be able to study the preparation arrangements and the technical information required.

Frequently asked questions

Is storage at room temperature always suitable?

No. The conditions must be established on the basis of the product concerned.

Can two identical batches be mixed?

This requires a validated procedure and traceability; it is not automatic.

Who checks the condition of the cans after delivery?

Responsibilities must be defined between the supplier, the carrier and the recipient.

Let’s secure your supply chain

Describe the conditions for receiving and using the bulk product so that logistics can be included in the manufacturing quote.

Study my bulk cosmetics supply