A cosmetic formula can work perfectly in a beaker and cause problems after packaging. Some packaging components can interact with the product, a seal can degrade, a pump can jam or light can change the appearance of a sensitive formula. Compatibility is therefore not limited to aesthetics or to the theoretical capacity of the container.
The tests to plan depending on the project
The technical manager defines the relevant checks: potential migration or interaction, colour change, leakage, closure, suitability for pumping, label durability, resistance to handling or changes in the formula on contact with the materials. The results must correspond to the container actually chosen, with its accessories and its decoration. An apparently identical replacement pack may need a review if its materials or its geometry differ.
A concrete decision case
A brand wants to present a serum in a clear pipette bottle to showcase its colour. If the formula is sensitive to oxygen or light, this presentation must be examined before it is approved. The solution may be to select another dispensing system, to revise the formula or to adapt the storage conditions; the choice must be based on observations, not on an absolute rule.
Packaging checklist: material; type of closure; fragrance; viscosity; label resistance; transport conditions; tests on the final product.
Points to approve in your file
For each of the following elements, write down the decision taken, the person who approves it and the document that can justify it:
- Materials.
- Pump.
- Leakage.
- Light.
- Storage.
- Tests.

Frequently asked question
Can a pump validated on one cream be used for all creams?
No. Viscosity, composition, materials and conditions of use vary. Each relevant formula–container combination must be examined according to risk, including after a change of supplier.
Apply this guide to your project
To apply this guide, document two elements first: the materials and the pump. If an industrial study is needed, specify the products, indicative volumes, packaging and countries of sale concerned. The BIOCYLAB team can examine this information according to the actual scope of the project; quantities, lead times and services must be confirmed before any decision.





